|
深圳市嘉亿通科技有限公司 
| 联系人：何先生 先生 (销售经理) |
 |
| 电 话：0755-29357722 |
|
手 机：13534019792  |
|
 |
|
 |
|
 |
|
| 供应SFP光模块 |
GbE 1000BaseLX
Single Mode 10km SFP Transceiver
1 Features:
1310nm MQW FP Laser diode transmitter
InGaAs PIN photodiode receiver
Operation data rate from 1250Mbps
Industry standard small form pulggable(SFP)
Duplex LC connector
Single +3.3V power supply
Differential LVPECL inputs and outputs
TTL signal detect indicator
Hotpluggable
capability
2 Application:
Switch to switch interface
Switch backplane applications
Router/Server interface
Other optical transmission systerms
3 Description:
ESFP731353
is transceiver compliant with SFP MSA.It features high performance at low cost ,and
providesusers a cost effective selection for data rate up to 1250Mbps.
The transmitter section and the receiver section work independently in the transceiver,The receiver
section contains an InGaAs PIN photodiode (active optical wavelength from 1100nm to1650nm),a
transimpedance amplifier and a post amplifier(with working data rate up to 1250Mbps),functionally transmit
received optical power to steady electrical data .The transmitter section contains an 1310nm FP laser diode
with backfacet
monitor and a laser driver with APC function ,transmit input electrical data to steady optical
output signal.
The product is compliant with the SFP MSA such as the LC optical interface receptacle ,3.3V supply
voltage,TTL signal detect logic .
4 Specification:
Operating Information
Part Number Input /Output Signal Detect Voltage Temperature
ESFP7X13XX
AC/AC TTL +3.3V 0℃ to 70℃
Absolute Maximum Ratings
Parameter Symbol Min. Max. Unit
Storage Temperature Ts 40
+85 °C
Operating Temperature To 0 +75 °C
Power Supply Voltage Vcc 0.5
+3.7 V
ESFP731353(
1310nm FP and PIN, 10km)
Transmitter Optical ,Electrical characteristics
Parameter Symbol Min. Typ. Max. Unit Note
Input Differentral Impedance Rin 100 Ω
Transmitter Differentral Input Voltage VinPP 500 1200 mV
Transmit Disable Input Hiht Voltage 2.0 V
Transmit Disable Input Low Voltage 0.8 V
Transmit Fault Input High Voltage 2.0 V
Transmit Fault Input Low Voltage 0.8 V
Transmit Disable Assert Time 0.14 5 us
Optical Transmit Power Po 9
3
dBm
Extinction Ratio ER 10 dB
Central Wavelength l 1310 nm
Output Spectrum Width Dl 4 nm
Receiver Optical Electrical Characteristics
Parameter Symbol Min. Typ. Max. Unit Note
Receiver Differential Output Voltage VoutPP 400 1600 mV
Receiver loss Of Signal Output
Voltage High
2 nm
Receiver Loss of Signal Output
Voltage Low
0.8 dBm 2
Sensitivity Sen 23
dBm 2
Maximum Input Power PinMAX 3
dBm Signal
Detect Range 35
20
dBm Signal
DetectHysteresis
0.5 dB |
 |
| |
| 深圳市嘉亿通科技有限公司 |
|
| 电 话： |
0755-29357722 |
| 传 真： |
0755-23493175 |
| 移动电话： |
13534019792 |
| 在线联系： |
|
| 公司地址： |
中国广东深圳市深圳龙岗南湾街道早禾坑工业区A栋二楼 |
| 邮 编： |
518000 |
| 公司主页： |
http://jyttek.qy6.com( 加入收藏) |
|
|
|
 |
|
|
免责声明： 以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，企业录对此不承担任何责任。如有侵犯您的权益，请来信通知删除。